PVC CUTTER (RATCHET TYPE)

A hand tool used to cut smaller diameter pieces of PVC and CPVC to length.

PUTTY KNIVES

Flat-bladed, steel knives used to apply wall repair and finish compounds and create final finishes. Also used to scrape and clean.

PRY BAR

A prying and demolition tool used to remove materials or fasteners such as nails. Also called a crow bar.

PROPANE TORCH

A torch used to heat copper pipe in preparation for soldering.

POWER PAINT SPRAYER

Used to apply paint to large areas. Requires careful masking and the use of respirators and goggles. Protective clothing must be worn.

POWER MITER SAW (COMBINATION)

A power miter saw that makes straight, bevel, and miter cuts.

POINTING TROWEL

Used for finishing work in tile and masonry installations.

POINT PUNCH

Used to puncture and fracture ceramic tile to ease removal.

PNEUMATIC POWER NAILER

A nailing device that uses compressed air to drive nails. Used for rough carpentry, roofing, and finish work.

PLUNGER

Used to remove clogs from toilets using a suction action. Try a plunger before using a closet auger.

PLASTIC TUBING CUTTER

Used to cut PVC and CPVC plumbing pipe to length.

PIPE WRENCH

Wrench used for tightening or loosening large plumbing fittings.

PAINTER’S TOOL (5-IN-1)

A versatile painter’s tool designed to open paint cans and clean roller covers. Also used to help with repair and preparation.
PAINTER’S TAPE

A low-tack tape used to protect surfaces while painting. Low-tack tape removes easily without leaving traces of adhesive.

PAINTER’S MASKING DISPENSER

Dispenser that applies masking tape to masking film or paper for masking surfaces such as baseboards in continuous application.

PAINT TRAY (PLASTIC)

A tray with a well at one end to hold paint and a sloped incline designed to apply paint evenly to a paint roller.

PAINT TRAY (METAL)

A tray with a well at one end to hold paint and a sloped incline designed to apply paint evenly to a paint roller.

PAINT TRAY LINER

A disposable plastic liner designed to fit in paint trays. Speeds cleanup.

PAINT SCRAPER

A tool designed to ease removal of old paint from surfaces in preparation for new applications.

PAINT ROLLER (HOT DOG)

A foam roller used to apply smooth, brush-mark free paint to surfaces such as trim and doors.

PAINT ROLLER GRID

Allows clean and even loading of paint on the roller when using a five-gallon bucket.

PAINT ROLLER CAGES

Used to hold paint rollers for application. A cage with at least 5 rods has the most reliable tension on the roller.

PAINT ROLLER AND CAGE

Used to apply paint to large surfaces. Rollers come in a variety of materials and thicknesses for different applications.

PAINT PAD

A foam pad attached to a handle used to apply even coats of paint. Alternative to a brush.

PAINT MIXER

A rod with a paddle on the end, used with an electric drill to thoroughly mix large quantities of paint.

PAINT MITT

A wool or synthetic glove used to apply paint to irregular surfaces such as fences, grillwork, or gates.

PAINT CAN POURING SPOUT

Attaches to the lid of a standard paint can to limit spills while pouring paint.

PAINT CAN OPENER

An inexpensive specialty tool designed specifically to open paint cans without damaging the lid.

PAINT BUCKET

A plastic or disposable cardboard paint bucket ranging in size from 1 quart to 5 gallons.
Used for holding and mixing paint.

PAINTBRUSHES (DETAIL)

Paintbrushes in various shapes and sizes used for detail work or decorative painting.

PAINTBRUSHES (BRISTLE)

Good quality bristle paintbrushes are used for finish painting and to guarantee smooth, even surfaces.

PAINTBRUSH (DISPOSABLE)

An inexpensive bristle style brush primarily for one-time use.

PAINTBRUSH COMB

Used to remove dried or caked paint from the bristles of paintbrushes.

PAD SANDER

A finishing sander with a vibrating action to reduce sanding marks on wood.